Adobe InDesign CS3 - Manual (Page 558)

INDESIGN CS3
User Guide
551
Printer’s marks
A. Crop marks B. Registration mark C. Page information D. Color bars E. Bleed marks F. Slug area
1 Choose File > Print.
2 Click Marks and Bleed on the left side of the Print dialog box.
3 Select either All Printer’s Marks or individual marks.
Print the bleed or slug areas
Specify the bleed and slug areas in the Document Setup dialog box. The bleed and slug areas are discarded when the
document is trimmed to its final page size. Objects outside the bleed or slug area (whichever extends farthest) are
not printed.
When printing, you can override the default location for bleed marks in the Bleed And Slug area of the Marks And
Bleed area.
Files saved in PostScript file format allow capable post-processing programs to implement their own variable bleed.
1 Choose File > Print.
2 Click Marks And Bleed on the left side of the Print dialog box.
3 Select either All Printer’s Marks or individual marks.
4 To override bleed settings in the Document Setup dialog box, uncheck Use Document Bleed Settings and enter
values from 0 to 6 inches (or equivalents) for Top, Bottom, Left, and Right (for single-sided documents), or Top,
Bottom, Inside, and Outside (for double-sided documents with facing pages). To extend the offset evenly on all sides
of the page, click the Make All Settings The Same icon
.
5 Click Include Slug Area to print objects using the slug area defined in the Document Setup dialog box.
You can preview the bleed and slug areas before printing by clicking the Bleed Preview Mode or the Slug Preview
Mode icon at the bottom of the Toolbox. (These may be hidden by the Preview Mode icon .)
See also
“Creating PostScript and EPS files” on page 564
Marks and Bleed options
The Marks And Bleed area includes the following options:
All Printer’s Marks Selects all printer’s marks including crop marks, bleed marks, registration marks, color bars, and
page information.
A
D
E
F
C
B