Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual - Manual (Page 69)

69
7.3.17 Control management
Network
The web interface loaded into the unit uses the IP configuration.
Under INTERFACE, you can define a new:
- IP address
- Netmask
- Gateway
- Port: Choose the port
- Protocol: Choose TCP (by default) or UDP
Choose DHCP if you want an automatic IP address assignment.
Under the Web RCS feature, you can define the communcation port for third party control applications to
use. You also have an indication on the number of connected devices.
For any information about the Third Party Protocol, please see chapter: 9. Additional Remote Control Systems.
Emergency presets:
The emergency presets allow you the recall quickly some Master Memo-
ries (see chapter: 7.5 Live / Master memories) . You have the possibility
to have up to 4 emergency memories. Please enable the feature then
choose for each line a master memory which will be recalled in case of
problem.
By enabling the emergency memories, some new buttons will appear into
the live edition:
If you click on A B C or D, it will recall automatically the MM1 MM2 MM3 or MM4 on the main
screen.
EDID Management:
The EDID manager is composed of three parts: the Outputs EDIDs, the EDID Library and Inputs EDID Settings.
The Outputs EDIDs is made to read EDIDs sent by video projectors or monitors in order to enable them to
be saved. EDIDs can be refreshed, one by one or all together. These EDIDs can be saved into the EDID Library
with a simple drag’n drop in the EDID Library. In the Library, the ten first EDIDs are defaults EDIDs ; it can’t
be modified; the protection is symbolized by a lock. The twenty-two others can be either uploaded from a
computer or saved from Outputs EDIDs.
7.3.17 Control management