Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual - Manual (Page 90)

90
8.1.1 Front panel update
8. OPERATING THROUGH THE FRONT PANEL
8.1 Front panel
8.1.1 Front panel update
Simply download the update file on your computer from the website. Then take the file LivecoreUpdate_xx_
xx_xx.awp and copy it into the main directory file on your USB key.
When the unit is running and the home menu is displayed, simply plug the USB key, the update is automatically
detected. A warning message will be displayed on the front panel screen of the unit. Please press YES or NO
with the help of the contextual button in order to launch or not the update. Unplug the USB when it starts to
install the version.
In the case of booting problem, the usb key can be introduced 1 minute after starting up the device, to force
the unit to update. Be sure to remove the USB key before starting the unit.
Here are the update steps. When detected, the LCD
front panel screen will display:
Then the unit start to decode the package
The next step is to unpack the package, when it is
finished, you will have the next message:
The updater will be launch into the LiveCore™ unit
displaying:
The update is now ready to start and this following
screen will be displayed:
Wait for the update to finish displaying this screen:
You update is now successfully completed.
If case of message like:
That means the update has failed, please try to
update the unit again by restarting the updater. If the
unit does not boot, please use the USB updater.