Argox Architect 1.11 - Manual (Page 34)

30
3
A RCHITECT
®
U SER
’
S M ANUAL
Creating
a
New
P
roject
Transmit Node
The Transmit node is used to call up remote link while running
an application in the Terminal.
To create a transmit node, do the following:
1. From the Node toolbar, click the Transmit node icon.
2. Move the mouse pointer to the project window.
3. Click on an area to place the node. The Transmit screen
appears.
4. On the Transmit tab, select the Port and Baud rate.
5. Click [OK] when done.
Other Transmit Node Settings
Page Tab Description
General Page Type your preferred node name.
Comment Page Type any comments or notes for this node. The
information here will not be shown nor affect the
Terminal.
Link Page Shows and lets you adjust how the nodes are
connected. See
“Step 3: Create Links” on page 32.