ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook User Manual

Page 52

Advertising
background image

Administrator’s Handbook

52

set link name name port-vlan priority [ 0 - 7 ]

Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with unmarked
priority bits (pbits) will be re-marked to this priority.

set link name name tagged-vlan name integer ports
[ lan-1... 4 | ssid-1...4 | vc-1 | vc-2 |vc-3 | vc-4 | vc-5 | vc-6 | vc-7 | vc-8 ]

Specifies a tagged VLAN on the selected port on the

link

named name. Default is

ptm

.

set link name name tagged-vlan name integer vid vlan_id

Specifies a VLAN ID (vid) on the selected link named

name

. Default is

0

.

set link name name tagged-vlan name integer priority [ 0 - 7 ]

Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with unmarked
priority bits (pbits) will be re-marked to this priority.

set link name name ppp sub-link link_name

Specifies a name

link_name

for this secondary link when one is required.

set link name name ppp auth-type [ on | off ]

Enables or disables PPP login authorization.

set link name name ppp username uname

Specifies a username

uname

for authentication on the specified link when

ppp auth-type

is set to

on

.

set link name name ppp password pwd

Specifies a password

pwd

for authentication on the specified link when

ppp auth-type

is set to

on

.

set link name name ppp magic-number [ on | off ]

Enables or disables LCP magic number negotiation.

set link name name ppp protocol-compression [ off | on ]

Specifies whether you want the gateway to compress the PPP Protocol field when it transmits datagrams over
the PPP link.

set link name name ppp max-failures integer

Specifies the maximum number of Configure-NAK messages the PPP module can send without having sent a
Configure-ACK message. The

integer

argument can be any number between 1 and 20.

set link name name ppp max-configures integer

Specifies the maximum number of unacknowledged configuration requests that your gateway will send. The

integer

argument can be any number between 1 and 20.

Advertising