ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook - Manual (Page 55)

55
set management cwmp tr69-cli-wait-time [ 5 - 600]
Sets the session wait time for a CWMP client to the specified number of minutes. The default is 15.
set management lanmgmt enable [ off | on ]
Turns TR-064 LAN side management services on or off. The default is on.
set management lanmgmt notify [ off | on ]
Controls whether we send out UPnP SSDP NOTIFY messages on a regular basis. The default is on.
set management lanmgmt port [ 0 - 65535 ]
Sets the TR-064 LAN management service port number. The default is 5000.
set management lanmgmt session-timeout [ 0 - 1800 ]
Sets the session timeout value fot TR064 LAN management sessions to the specified number of seconds. The
default is 1800.
set management shell idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for telnet access to the gateway, after which a user must re-login to the
gateway. Default is
15 minutes for telnet.
set management shell ssh-port [ 1 - 65534 ]
Specifies the port number for secure shell (SSH) communication with the 2247-N8. Defaults to port 0 (off).
set management shell telnet-port [ 1 - 65534 ]
Specifies the port number for telnet (CLI) communication with the 2247-N8. Because port numbers in the
range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when assigning
new port numbers to the 2247-N8 telnet configuration interface. A setting of
0 (zero) will turn the server off.
set management upnp enable [ off | on ]
Turns Universal Plug-and-Play (UPnP) on or off. The default is on.
set management upnp log [ off | on ]
Set the 2247-N8 to store a log of UPNP activity. The default is off.
set management upnp port [ 1 - 65535 ]
Set the universal plug and play port number. The default is 5000.
set management upnp read-only [ off | on ]
Allows read only access for UPNP sessions. The default is off.