ARRIS 2247-N8-10NA (v9.1.x) Admin Handbook User Manual
Page 57
57
set management remote-access https-total-timeout [ 1...120 ]
Specifies a total timeout period of inactivity for secure remote HTTPS access to the gateway, after which a user
must re-login to the gateway. Default is
20
minutes for HTTPS.
set management remote-access https-max-clients number
Specifies the maximum number of client sessions for secure remote web access management. Defaults to 1
(one).
set management remote-access telnet-port [ 1 - 65534 ]
Specifies the port number for remote access telnet (CLI) communication with the 2247-N8. Because port num-
bers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when
assigning new port numbers to the 2247-N8 telnet configuration interface. A setting of
0
(zero) will turn the
server off. Defaults to port
23
.
set management remote-access telnet-idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for remote telnet access to the gateway, after which a user must re-
login to the gateway. Default is
5
minutes for telnet.
set management remote-access telnet-total-timeout [ 1...120 ]
Specifies a total timeout period of inactivity for remote telnet access to the gateway, after which a user must
re-login to the gateway. Default is
20
minutes for telnet.
set management remote-access telnet-max-clients number
Specifies the maximum number of client sessions for remote telnet access management. Defaults to
4
.
set management remote-access ssh-port [ 1 - 65534 ]
Specifies the port number for secure shell (SSH) communication with the 2247-N8. Defaults to port
22
.
set management remote-access ssh-idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for remote secure shell (SSH) access to the gateway, after which a user
must re-login to the gateway. Default is
5
minutes for SSH.
set management remote-access ssh-total-timeout [ 1...120 ]
Specifies a total timeout period of inactivity for remote secure shell (SSH) access to the gateway, after which a
user must re-login to the gateway. Default is
20
minutes for SSH.
set management remote-access ssh-max-clients number
Specifies the maximum number of client sessions for remote secure shell (SSH) access management. Defaults
to
4
.