Avalon Firestyles 1080 CF Installation - Manual (Page 10)

10 Installation
(for qualified installers only)
© Travis Industries 4090807 100-01193_003
Preparing the Fireplace Stand-offs
This appliance is shipped with the header and side stand-offs in the retracted position. These stand-
offs must be placed in their upright position prior to installing the fireplace
WARNING: Failure to correctly erect the stand-offs may lead to a serious fire-hazard and will void
the listing and warranty of this fireplace.
Side Stand-Offs
Bend the side stand-off until it is flat.
Remove the two screws behind the side
stand-off and place them aside.
Bend the stand-off return back until
the holes in the stand-off line up with
the holes on the side of the fireplace.
a
b
c
d
Secure the stand-off with two
screws removed earlier.
Repeat steps "a", "b", and "c"
for the opposite side.
Figure 4