Avalon Firestyles 1080 CF Installation - Manual (Page 56)

56 Finalizing the Installation
(for qualified installers only)
© Travis Industries 4090807 100-01193_003
Fireback Installation
(Rectangular 96100172)
WARNING Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.
WARNING The firebacks are fragile (especially after being burned) – handle with care.
NOTE The firebacks are 2-sided. When installing, use the desired pattern. Also make
sure the rear brick is correctly positioned.
UP UP
Herringbone Pattern Brick Pattern
1 Remove the glass frame, logs, and grate.
2 Remove and discard the ember tray and burner tray cover..
Loosen the screw and remove the clips located on
the firebox ceiling (both sides).
a
Remove and discard
the ember tray and
the burner tray cover.
c
b
Remove this clip on
the firebox floor.
d
Remove this clip on the firebox
floor. Bend the clip upwards to
form a 90° angle.
Figure 38