Avalon Firestyles 1080 CF Installation - Manual (Page 58)

58 Finalizing the Installation
(for qualified installers only)
© Travis Industries 4090807 100-01193_003
Andiron Installation
Two clips are included with this fireplace for installation of the optional andirons. Follow the
directions below for installation.
Install the andirons last, after the firebacks (if used), and logs are in place.
Use the two screws (included with the andirons) to
secure the andiron brackets (included with the fireplace)
to the andirons.
Remove the four screws on the firebox floor. Position
the andirons and replace the screws to secure.