Avalon Firestyles 564 SS Gas Installation - Manual (Page 9)

Installation
(for qualified installers only)
9
© Travis Industries 4 0 7 0 6 2 0 100-01188_000
Top Stand-Off Assembly
The top stand-offs must be assembled prior to installation.
Standoff
a
Replace the screw to secure the standoff.
Bend the standoff in the numbered
sequence shown above.
Remove the screw below the standoff.
b
1
2
3
c
The standoffs are shipped in the flat position.
Make sure to follow the instructions below before
installing the fireplace.
BEFORE
Warning:
You must follow the instructions below to elevate both standoffs. Failure to
do so will result in an extreme fire hazard.
1/4" Nutdriver
AFTER