Becker TRAFFIC ASSIST Z217 - Manual (Page 19)

19
GENERAL OPERATION >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Connection to the mains outlet
Connecting power supply
Connection to the public mains grid is
achieved using the optionally available
mains power supply unit. Please proceed
as follows to connect to the mains:
> Hold the connector and push it all the
way into the connecting socket in the
Traffic Assist without using excessive
force.
> Insert the plug of the power supply unit
into the socket.
TMC antenna
The supplied TMC antenna is integrated
into the cable for power supply.
The TMC antenna runs in parallel with
the the cigarette lighter cable in the deliv-
ered condition.
If the TMC reception is poor, you must
remove the cable of the TMC antenna
from the cable for the cigarette lighter.
You can then use the supplied suction cup
to attach the TMC antenna to the wind-
shield.
GPS-antenna
Unit antenna
The GPS antenna is integrated into the
housing.
!Danger!
Ensure that you do not have wet hands
and that the power supply unit is dry.
Only connect the power supply unit to
a permissible mains power supply.
Note:
Remove the power supply unit when not
using the Traffic Assist for longer periods
of time.
Note:
The TMC antenna must be installed in
such a way that it does not distract you
while driving.
Note:
The integrated GPS antenna is not suita-
ble for use in vehicles with anti-glare win-
dows (metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehi-
cles with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS an-
tenna. Please consult your local specialist
dealer.