Bematech MP-4000 TH Programmer's Manual - Manual (Page 19)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 19
[Description] This command has no effect when ESC/POS mode is enabled.
ESC/POS mode fixes paper/printing width to 80 mm / 76 mm.
GS F9h , n
[Function] Enable/disable paper near end sensor.
[Format] ASCII GS F9h , n
Hexadecimal 1D F9 2C n
Decimal 29 249 44 n
[Description] Enable or disable paper near end sensor (PNES).
n
= 1, 31h – enable PNES
n = 0, 30h – disable PNES
GS F9h + n
[Function] Set and save printing intensity.
[Format] ASCII GS F9h +
n
Hexadecimal 1D F9 2B n
Decimal 29 249 43 n
[Description] Set and save printing intensity on flash memory.
n may vary from 0 (00h, 30h) to 4 (04h, 34h), meaning weakest to
strongest printing respectively.
GS FAh n
[Function] Set printer language.
[Format] ASCII GS FAh
n
Hexadecimal 1D FA n
Decimal 29 250
n
[Description] Set printer language.
n = 0, 30h – english
n = 1, 31h – portuguese
n =
2, 32h - spanish