Bematech MP-4000 TH Programmer's Manual - Manual (Page 32)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 32
ESC H
[Function] Set default column per line
[Format] ASCII ESC H
Hexadecimal 1B 48
Decimal 27 72
[Description] Set the default cpl. All characters type can be set in this mode. See
table 1 to know the number of cpl, according to your printer model.
ESC P
[Function] Set default column per line
[Format] ASCII ESC P
Hexadecimal 1B 50
Decimal 27 80
[Description] This command set the default cpl. All characters type can be set in this
mode. See table 1 to know the number of cpl, according to your printer
model. It is a copy of ESC H.
ESC SI
[Function] Set condensed mode
[Format] ASCII ESC SI
Hexadecimal 1B 0F
Decimal 27 15
[Description] This command set the ESC SI cpl. All characters type can be set in
this mode. See table 1 to know the number of cpl, according to your
printer model.