Bematech MP-4000 TH Programmer's Manual - Manual (Page 21)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 21
GS F9h ( 0
[Function] Load default user configuration.
[Format] ASCII GS F9h ( 0
Hexadecimal 1D F9 28 30
Decimal 29 249 40 48
[Description] Reload all configurations from flash memory.
GS F9h ) 0
[Function] Print user configuration.
[Format] ASCII GS F9h ( 0
Hexadecimal 1D F9 29 30
Decimal 29 249 41 48
[Description] Print user configuration.
GS F7h BS NUL ! i1...i4 s1..s4
[Function] Set IP address and subnet mask.
[Format] ASCII GS F7h BS NUL ! i1...i4 s1..s4
Hexadecimal 1D F7 08 00 21 i1...i4 s1..s4
Decimal 29 247 08 00 33 i1...i4 s1..s4
[Description] Set IP address and subnet mask on hexadecimal format without
points.
[Example] IP 10.1.1.250 and SUBNET 255.0.0.0 must be sent as 0Ah 01h 01h
FAh FFh 00h 00h 00h
GS F9h * n
[Function] Set USB address.
[Format] ASCII GS F9h * n
Hexadecimal 1D F9 2A n
Decimal 29 249 42 n
[Description] Set USB address to allow the use of more than one printer on same
computer.