Bematech MP-4000 TH Programmer's Manual - Manual (Page 5)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 5
Introduction
The objective of this manual is to give to programmers all necessary information to properly
program and integrate the MP-4000 TH printer into a system. The MP-4000 TH printer is able
to interpret ESC/Bema commands and ESC/POS
® 1 commands.
For further information refer to the documentation below available in our website:
www.bematech.com
User’s Manual – Contains information referring to operation, features and specifications of
the MP-4000 TH printer.
Service Manual – Contains information necessary to identify and resolve MP-4000 TH printer
problems.
Developers advice
Beside this manual, the drivers and API (and all their documentation) listed below are available
from our website ( http://www.bematech.com ):
• Windows 2000/XP/Vista-32 – API dynamic-link library driver (mp2032.dll); recent
spooler drivers (BemaSetupXXxX.exe); parallel port driver and USB port driver;
software for testing purposes.
• Windows 9x/ME/NT4 - API dynamic-link library driver (mp2032.dll); old and
unsupported spooler drivers (BemaSetupXXxX.exe);
• Linux (x86) - CUPS TM spooler drivers compatible with Redhat 8.0; partial
implementantion of mp2320 library as a shared object (mp2032.so);
1 ESC/POS® is registered trademark of Seiko Epson Corporation.