Bronkhorst E-7000 - Manual (Page 27)

BRONKHORST HIGH-TECH B.V.
9.17.004 page 27
Menu descriptions
4100 0000 Counter Reset Enable.
Here you can enter how the counter may be reset.
4110 0000 Keyboard Reset. Here you can enable/disable a counter reset by the keyboard.
4120 0000 External Reset. Here you can enable/disable a counter reset by an external signal.
4130 0000 FLOW-BUS Reset. Here you can enable/disable a counter reset via the FLOW-BUS by means of
f.i. a Personal Computer.
4140 0000 When the counter unit is reached, the counter is reset.
4200 0000 Counter Mode.
Here you can select how the counter must behave.
4210 0000 This option will disable the counter.
4220 0000 This option will let the counter count-up*.
4230 0000 This option will let the counter count-up, and check if a limit has been reached.
4300 0000 Edit Counter Unit.
Here you can change the unit for the counter to display the counter value.
4310 0000 Counter Unit Editor.
With UP/DOWN you can change the unit to be counted with.
4400 0000 Edit Counter Limit.
Here you can edit at which value the counter will reach its limit.
4410 0000 Counter Limit Editor.
With UP/DOWN you can change the number at the cursor, and with LEFT/RIGHT you go to
another cursor position.
4500 0000 Relay At Limit.
Here you can enter what you want the relay to do when a limit has been reached.
4510 0000 This option will disable a relay action at a counter limit.
4520 0000 This option will let the relay pulse at a counter limit.
4530 0000 This option will let the relay be continuously on at a counter limit.
4600 0000 Limit Setpoint.
Here you can configure what to do with the setpoint at a limit. You can make the setpoint go to a
predefined value temporarily until reset situation.
4610 0000 This option wil not change the setpoint.
4620 0000 This option will change the setpoint to the entered value.
4621 0000 Setpoint At Counter Limit Editor.
Here you can enter the setpoint value to be active until reset.
NOTE:
Counter will be disabled when sensor type of instrument is set on either ‘Pressure’ or ‘Other’.
* If in COUNTER MENU RELAY the relay is turned on (pulse or continuous) Every time the
limit or its multiple is reached, a pulse is given.