Bronkhorst E-7000 - Manual (Page 33)

BRONKHORST HIGH-TECH B.V.
9.17.004 page 33
Menu descriptions
7100 0000 Display Mode.
Here you can change the values that will be displayed on the Readout Display.
7110 0000 This option will display the usertag, the fluidname and the measured value in the measure
menu readout screen.
7120 0000 This option will display the usertag, the fluidname and the counter value.
7130 0000 This option will display the counter value and the measured value
7140 0000 This option will display the setpoint and the measured value.
7150 0000 This option will display the measured value in a percentage bar from 0 to 100%.
7160 0000 This option will display the measured value with large characters.
7200 0000 Reading Mode. Here you can switch between direct/percentage reading.
7210 0000 Switch to percentage reading.
7220 0000 Switch to direct reading in absolute values. Absolute values can be selected at sensor type and
capacity of the instrument menu.
7230 0000 Switch to percentage bar reading.
7300 0000 Local Identification. Here you can change the User Tag and check the hard- and software
identification settings of this module.
7310 0000 User Tag. Here you can view the user tag of this module.
7311 0000 User Tag. Here you can change the user tag.
7320 0000 Serial number. Here you can view the serial number of this single channel module. The
Bronkhorst High-Tech B.V. serial number is a unique identification for FLOW-BUS modules/
instruments.
7330 0000 Device Type. Here you can view as which type the device is configured.
7340 0000 Model Number. Here you can view the model number of the module.
7350 0000 Version. Here you can view the software version.
7360 0000 Manufacture Configuration. Here you can view the manufacture configuration
7400 0000 Restore Backup. This function restores the backup (the factory settings) which was made after
the final test in de factory.
7410 0000 Press ‘enter’ to restore backup.