BSS Audio FDS-355 OMNIDRIVE Owner's Manual - Manual (Page 13)

13
H PC card slot
The card slot is used for storing/recalling program data via a PC card.
Refer to section 16.0; PC Card for more information.
J Input LEDs
These indicate which (combination of) input channels are being edited. The
Card LED underneath illuminates when a PC Card is inserted into the front
panel slot.
Note: If all three input LEDs illuminate at once (which is highly unlikely), the
unit is clipping internally due to large amounts of EQ or gain being added.
K Output controls
Refer to section 5.2; Output section for more detail.