Cadac S-Type - Manual (Page 36)

5-8 Stereo input module 8412
S-Type Revision S2005-6
814164 3)/
Press this button to send the pre-fader signal to the LISTEN module. Note that
selecting PFL will clear any previously selected PFL’s, unless HLD (Hold) is selected
on the stereo master module 8414. If HLD is pressed, then the PFL will be added to
any of the previously selected signals on the Listen bus.
A temporary hold function can be achieved by selecting and holding the desired PFL.
While holding down this switch you can add additional PFL channels as required.
Pressing any of the selected PFL switches a second time will clear the selections
and resume normal operation.
814165 'XDO#450VHJPHQW#OHYHO#PHWHU
12-segment level meters showing the channel signal level immediately pre-fader.
814166 )DGHU
100mm plastic conductive P & G fader used to control the signal level.
814167 2SHQ#IDGHU#/('
This LED illuminates when the fader is open and not muted locally or by a VCA Mas-
ter.