Cadac S-Type - Manual (Page 47)

Stereo output, Comms, Osc and Talkback module 8414 7-1
Revision S2005-6 S-Type
: 6WHUHR#RXWSXW/#&RPPV/#2VF#DQG#
7DONEDFN#PRGXOH#;747
The 8414 module contains the main stereo output with a full size 100mm fader, 12-
segment meters for left and right channels in addition to PFL, Mute and Insert.
The module enables you to send the stereo mix to the matrix outputs via individual
routing buttons and dual concentric potentiometers - odd numbers goes to left (upper
control), even number goes to right (lower control). In addition, each pair of sends
has a sum-to-mono feature.
The oscillator can be switched to 100Hz, 1kHz and 10kHz and can be routed to the
channels and/or the sub-groups.
The talkback section contains the same mic amplifier as found on the mono input
channels with optional 48V and HPF. The talkback signal can then be routed to the
auxiliary sends and sub-groups.
The listen output level is controlled via a dedicated level control. Two dedicated 12-
segment level meters provide visual feedback. Mute, Hold and Clear buttons are
included.
In normal mode, the PFLs are self cancelling, i.e. pressing any PFL buttons on the
console will clear any previous selection. By selecting the PFL Hold switch it is possi-
ble to enable multiple PFL switches simulataneously.
A temporary hold function can be achieved by selecting and holding the desired PFL
switch, while adding additional PFLs as required. Pressing the PFL switch a second
time will clear the selected channels and resume normal operation.