Rear panel stereo output, comms, osc and – Cadac S-Type User Manual
Page 56
Advertising
7-10
Stereo output, Comms, Osc and Talkback module 8414
S-Type
Revision S2005-6
:15
5HDU#SDQHO#6WHUHR#RXWSXW/#&RPPV/#2VF#DQG#
7DONEDFN#PRGXOH#;747
Inputs and outputs are electronically balanced and con-
nected via 3-pin XLRs and follow the wiring convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal (cold)
The 0.25” TRS jack connector for the external input is
unbalanced:
TIP = LEFT
RING = RIGHT
SLEEVE = Screen
IMPORTANT NOTE: Pin 1 on XLR connectors and the
‘sleeve’ connections on the jack sockets are connected
to the FRAME. This is to ensure that the console can
comply with the Electromagnetic Compatibility (EMC)
directive.
Advertising