Cadac S-Type - Manual (Page 5)

Introduction v
Revision S 2005-6 S-Type
,QWURGXFWLRQ
Welcome to the CADAC S-Type compact frame mixing console. The S-Type is the
result of extensive market research, reflecting users’ need for a high quality, moder-
ately sized console with state of the art design and performance.
CADAC have been synonymous with superior audio quality, adaptability in use and
rock solid build for over three decades. The S-Type, created from the same lineage,
is equally suitable for the hard life on the road as well as the perhaps more peaceful
existence in an industrial, corporate or theatre setting.
As is the case with the rest of the CADAC line-up, the S-Type provides complete flex-
ibility that allows for any configuration the user wishes to apply, whilst providing the
reliability that is paramount to the production of a show, concert or corporate event.
The audio legacy of previous CADAC mixing consoles is reflected in the design of
the new S-Type. For those of you familiar with the legendary J and F-Types, it will
come as no surprise to find the same renowned mic amplifier, VCA and fully para-
metric 4-band equaliser and respected audio architecture. The S-Type mirrors the
same attention to quality and detail that have made the CADAC name the ultimate
choice for the discerning professional.
Ergonomics has been placed high on the design brief. Every function switch is sup-
ported by an indicator LED for full visual feedback in low light conditions.
All internal busses are fully balanced and use very low value mix resistors to provide
both low noise and exceptionally low crosstalk.
Output sections are fully balanced and compensated* to provide low noise with the
power to drive long lines - again with very good CMRR.
(*Compensated means that if one leg of the balanced circuit goes short circuit, there
will be no 6dB drop in level.)
All areas of circuitry are extensively power decoupled. This prevents broadband
noise from being transmitted into adjacent circuits through the power rails. Extensive
decoupling of the signal paths minimizes the low frequencies phase shift.
The S-Type frame is available in 3 sizes - 17, 25 or 33-way. In combination, these
frame sizes cater for the most common console requirements, and may, of course be
configured to meet your specific needs. A standard feature is the ability to connect
frames together via the external frame bus connector.
Finally, it goes without saying, that in the CADAC tradition the sound quality of the S-
Type is in a class of its own.