Rear panel group, matrix and auxiliary output – Cadac S-Type User Manual
Page 46
Advertising
6-8
Group, matrix and aux output - stereo 8413, mono 8415
S-Type
Revision S2005-6
915
5HDU#SDQHO#JURXS/#PDWUL[#DQG#DX[#RXWSXW=####################
6WHUHR#;746#0#0RQR#;748
8413 stereo 8415 mono
Inputs and outputs are electronically balanced and con-
nected via 3-pin XLRs and follow the wiring convention:
PIN 1 = Screen
PIN 2 = In-phase signal (hot)
PIN 3 = Out-of-phase signal (cold)
The 0.25” TRS jack connectors use the wiring conven-
tion:
TIP = In-phase signal (hot)
RING = Out-of-phase signal (cold)
SLEEVE = Screen
IMPORTANT NOTE: Pin 1 on XLR connectors and the
‘sleeve’ connections on the jack sockets are connected
to the FRAME. This is to ensure that the console can
comply with the Electromagnetic Compatibility (EMC)
directive.
Advertising