Daktronics Remote Control System RC-100 - Manual (Page 42)

34 Baseball Operation
Hit, Error
Display Action
Press the <HIT> or <ERROR> key to turn on the Hit or
Error indicator or digits.
The message at left will appear briefly.
Time, At Bat, H/E (Alternate Function)
The <TIME>, <AT BAT>, and <H/E> alternate function keys are used to select what is
shown on the two time digits. First press the <ALT> key and then one of the above keys to
select what is displayed on the two time digits. If <TIME> is selected, they will show two
digits of time. If <AT BAT> is selected, they will show the player At Bat. If <H/E> is selected,
they will show an ‘H’ or an ‘E’ on the first digit when <HIT> or <ERROR> is pressed.
Time/At Bat
If the controller is set to show the time, the <TIME/AT BAT  > key operates like the standard
<SET TIME> key (refer to Section 5.3). If the controller is set to show AT BAT, it will operate
as shown below.
Display Action
NN = current setting
Press the <TIME/AT BAT > key, enter the current
batter number, and then press <ENTER>.
ERROR ON
AT BAT: EDI T
NN*