Digi-Star TCX-1000 SERIES - Manual (Page 14)

D3556 05/29/03 REV. 2.2 Copyright 2001
14
E. SERIAL DATA FORMAT
All characters are in ASCII
The output Data Format is:
CR / D6 / D5 / D4 / D3 / D2 / D2 / D1 / D0 / STATUS / DISPLAY-MODE / LF
CR = ASCII Carriage Return ODH
D6 = The most significant weight digit or 2DH if minus weight
D5-D0 = Weight digits plus a decimal point 2EH
STATUS = Description below:
DISPLAY MODE = The display mode byte indicates the mode of the
indicator. See the following table:
ASCII
CHARACTER
DESCRIPTION
0 SEGMENTS
1 TIME / DATE
2 OUTPUT
3 PRINTER FORMAT
4 GROSS
5 NET
6 INTERNAL COUNTS
7 CONFIGURATION
8 CAPACITY
9 CAL 0
: CAL POINT
; TARE
< WARM-UP IN PROGRESS
= ILLEGAL