Digi-Star TCX-1000 SERIES - Manual (Page 21)

D3556 05/29/03 REV. 2.2 Copyright 2001
21
drCo Delivered Weight
Print Line = No dr Weight Print 0 18
01 – 99 = dr Weight Line
gp Gross Mode
Printout gtn = Weights Printed Form
Gross gtn g
g = Gross Print
gtn Weight Digit Print ds = Double Size Print ds Ds
Character Size ns = Normal Size Print
t TIME FORMAT
Some Software
Versions Require
24 Hour Formats
Due to Data
Recording
Compatibility Date
Format 12Hr= 12 HOUR AM / PM
24Hr= 24 HOUR 12AP 12AP
USdAtE = MM-DD-YY USdAtE UsdAtE
ECdAtE = DD-MM-YY
LEgndS Weight Legends = PRINTED LEgendS LegndS
NoLgdS = SUPPRESSED
PrUnit Print Units = PRINT UNIT PrUnit noUnit
tAPr AUTOTARE ON
PRINT If the user
requires that the
indicator autotare
on print, this
option should
remain enabled tAPr=n NO AUTOTARE
tAPr=y AUTOTARE ON
PRINT ON PRINT tAPr=n tARp=y
CSn Consecutive
Number Clear CSn=on INCREMENTS CS CSn=on CSn=on
NUMBER ON PRINT
CSnClr RESET CS NUMBER
E. PRINTER DATA OUTPUT FORMAT
The printer communication channel consists of an RS-232 data output and a device busy input.
The printer output is only active when the printer output has been enabled.
All characters are in ASCII.
The Data formats are:
Time Date Gross Net Tare
HH:MM MNM-DD-YY WWWWWWWWuu GR WWWWWWWuu NT WWWWWWWWuu TA
Note: uu = LB or kg, units currently displayed
W = Weight Digit, minus sign, decimal point, or blank space
F. PRINTER INTERFACE CONNECTIONS
For printer communication are made to the 4 pin male AMP receptacle as shown in the diagram
below. Refer to the following diagram and table.
Inside of connector
Black = Ground