Digi-Star TCX-1000 SERIES - Manual (Page 26)

D3556 05/29/03 REV. 2.2 Copyright 2001
26
CONTROL DISPLAYED PROGRAM VALUE AUTO=
1
AUTO=
2
AUTO=
3
Fon=Hi High Vibration
Fon=on Filter Locked On
GRADUATION SIZE gd0.001 .001 20 1 10
gd0.002 .002
gd0.005 .005
gd0.01 .01
gd0.02 .02
gd0.05 .05
gd0.1 .1
gd0.2 .2
gd0.5 .5
gd1 1
gd2 2
gd5 5
gd10 10
gd20 20
gd50 50
gd100 100
gd200 200
gd500 500
PRIMARY UNITS CAL in kg LB LB LB
CAL in lb
MULTI-POINT
CALIBRATION
ENABLE CALb=1 SINGLE POINT
CALIBRATION
8 8 1
CALb=8 MULTI-POINT <=8
Calibration
This option either two
points the calibration
curve, beginning and
end, zero and maximum
load, or fits a curve
along the load line with
8 points. The latter
option would ensure a
more accurate
weighment but the
former option is used
most often.
FILTER READINGS Ftr=no DISABLED 32 32 32
Ftr=02 2 Readings
Ftr=04 4 Readings
Ftr=08 8 Readings
Ftr=16 16 Readings
Ftr=32 32 Readings
FILTER TYPE Fon=Lo Low Vibration ST ST ST
Fon=St Standard Filter
FILTER OFF
READINGS FoFF=1 1 Reading 2 2 8
FoFF=2 2 Readings
FoFF=4 4 Readings
FoFF=8 8 Readings