Digi-Star TCX-1000 SERIES - Manual (Page 36)

D3556 05/29/03 REV. 2.2 Copyright 2001
36
IX. CERTIFICATE OF CONFORMANCE FOR WEIGHING AND
MEASURING DEVICES
National Conference on Weights and Measures
15245 Shady Grove Road, Suite 130 • Rockville, MD 20850
Certificate Number: 01-060
Page 1 of 2
National Type Evaluation Program
Certificate of Conformance
for Weighing and Measuring Devices
This device was evaluated under the National Type Evaluation Program (NTEP) and was found to comply with the applicable
technical requirements of Handbook 44, "Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring
Devices." Evaluation results and device characteristics necessary for inspection and use in commerce are on the following pages.
Effective Date: August 31, 2001
Ronald D. Murdock Louis E. Straub
Chairman, NCWM, Inc. Chairman, National Type Evaluation Program Committee
Issue date: August 31, 2001
Note: The National Conference on Weights and Measures does not "approve", "recommend", or "endorse" any proprietary product or
material, either as a single item or as a class or group. Results shall not be used in advertising or sales promotion to indicate explicit or
implicit endorsement of the product or material by the NCWM.
Submitted by:
Digi-Star LLC
790 W. Rockwell Ave.
Fort Atkinson, WI 53538
Tel: (920) 563-1400
Fax: (920) 563-9721
Contact: Bruce L. Johnston
For:
Indicating Element
Digital Electronic
Models: TC-10 and TCX-1000*
nma
x: 10,000
Accuracy Class: III/IIIL
Standard Features and Options
Gross/tare/net display modes Options:
Liquid crystal display (LCD): Model TCX-1000 Keyboard tare
Light emitting diode (LED) display: Model TC-10 Multiple tare memories
Semi-automatic zero and tare with motion detection Printing of time, date, I.D. number
Automatic zero setting mechanism Weigh-in/Weigh-out capability
lb/kg conversion (Other available units: g = grams, RS-232 Computer Interface
oz = ounces, lb = pounds, kg = kilograms,
LT = long tons, ton = short tons)
*Letters and combinations of letters used as a suffix on both models to define options:
A Advanced Keyboard and Set-Point Display
D Desk Top
W Washdown Wall Mount
S Simplified Keyboard without numeric keypad (When used as the first suffix)