Digi-Star StockWeigh 600 - Manual (Page 10)

StockWeigh 600
6
Weigh Method
Weigh method allows the operator to adjust
how much processing or number crunching
the scale processor does to the load cell data
before displaying the weight. See Appendix
“B” for details. Select weigh method #4
“Lock-On” for animal weighing.
Lock-On
Available settings are 1 thru 9. A low value,
such as a 1 or 2, allows the system to be more
sensitive to animal motion. A high value, such
as an 8 or 9, allows the scale to lock on faster.
Use the lowest setting that still allows the
system to lock on consistently.
Lock-N-Hold
If ON - lock weight is held until next animal is
weighed.
%%
Auto Off
This feature allows the operator to have the
indicator automatically shut itself OFF after
either 15, 30, 45 or 60 minutes of inactivity.
This feature will extend battery life on battery
powered portable scales. Prior to the scale
shutting off, the message “ ” will be
scrolled across the display for approximately
15 seconds. Pressing a key on the indicator
during this time will prevent the unit from
turning off and restart the internal shut-off
timer.
Lock-On Store
Select lock on storage method.
Off
-Sends data to computer port only when
TAREAP or APRINT are set to “ON”.
-Set PRTFMT to select desired print format.
See Appendix F.