Step two – setup – Honestech VHS to DVD 3.0 Deluxe User Manual
Page 56
56. honestech
Step Two – Setup
Once your connections are complete;
• Open the Audio Recorder and check your device settings.
Audio Device – this field should reflect the capture device/card that connects between
your audio player and your computer. *Many capture devices/cards will be automatically
detected by the software, and listed as your audio device by default.
Video Device – This option is only required when using a combination audio/video capture
device such as the USB VIDBOX, and should reflect the capture device/card that connects
between your audio player and your computer. *Many capture devices/cards will be
automatically detected by the software, and listed as your video device by default.
USB2.0 VIDBOX must be selected as your matching video device when selecting USB
VIDBOX for your Audio device.
If your device settings are correct;
• Press play on your audio player to verify your connections and settings match up. If your
setup is good, you should hear the audio player through your computer and see the Signal
Frequency Bars moving in unison.
While previewing your audio signal;
• Use the Audio Device Recording Volume to adjust the recording volume. Click the gear box
to the right of the Audio Device listing to access the Recording Volume.
Tip: It may also be necessary to adjust the volume of your
audio device/amplifier to provide ample recording volume.