Kanguru 4HD SATA - Manual (Page 17)

17
3.1.5 Ratio Copy
The Ratio Copy function allows you to copy a defined percentage of the Master hard drive. The
Master hard drive is divided in 1000 units. You must define the beginning and ending percentages
before using this function. To define the percentages you have to enter the CONFIGURATION mode,
select SET COPY RATION and then define the ratio percentage. For more information on defining
the beginning and ending sectors, please see section 3.4.10 Set Copy Ratio p.44.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] RESIZE COPY
[ ] AREA COPY
[ ] RATIO COPY ->
<- Back UP/DN Sel ->
X
[COPY]
RATIO COPY
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to COPY mode. Press the RIGHT button to enter
COPY mode.
2. From the COPY Function Menu, press the UP or DOWN
buttons to navigate to the RATIO COPY function. Press the
RIGHT button to select RATIO COPY.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Ratio Copy.
5. Once the KanguruClone has finished cloning, it will display
a “V” for verified target drives or an “X” for failed drives.
Ratio Copy