Kanguru 4HD SATA - Manual (Page 22)

22
3.2 Diagnostic Functions
The KanguruClone includes several diagnostic functions to run status reports on any Target hard drive.
The following diagnostic functions can be used to verify if a drive can be used with the KanguruClone:
Random Seek, Sequential Seek, Write Pattern and Read Verify.
3.2.1 Random Seek
The Random Seek function randomly reads sectors to see if there are bad sectors in the hard drive.
Random Seek is a quick version of the Sequential Seek, which reads all sectors.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] RANDOM SEEK
[ ] SEQ. SEEK
[ ] WRITE PATTERN
->
<- Back UP/DN Sel ->
X
[DIAGNOSTIC]
RANDOM SEEK
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to DIAGNOSTIC mode. Press the RIGHT button
to enter DIAGNOSTIC mode.
2. From the DIAGNOSTIC Function Menu, press the UP or
DOWN buttons to navigate to the RANDOM SEEK function.
Press the RIGHT button to select RANDOM SEEK.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Random Seek.
5. Once the KanguruClone has finished the random seek, it will
display a “V” for verified target drives or an “X” for failed
drives.
Diagnostic Functions / Random Seek