Kanguru 4HD SATA - Manual (Page 24)

24
3.2.3 Write Pattern
The Write Pattern function writes a specific pattern that fills the entire HDD with the values configured
in the Set Pattern mode. You can define the pattern from 0000 ~ FFFF in CONFIGURATION mode
under SET PATTERN. The default pattern is “0000”. For more information on the Set Pattern function,
please see section 3.4.8 Set Pattern, p.42.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] RANDOM SEEK
[ ] SEQ. SEEK
[ ] WRITE PATTERN ->
<- Back UP/DN Sel ->
X
[DIAGNOSTIC]
WRITE PATTERN
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to DIAGNOSTIC mode. Press the RIGHT button
to enter DIAGNOSTIC mode.
2. From the DIAGNOSTIC Function Menu, press the UP or
DOWN buttons to navigate to the WRITE PATTERN function.
Press the RIGHT button to select WRITE PATTERN.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Write Pattern.
5. Once the KanguruClone has finished the write pattern, it will
display a “V” for verified target drives or an “X” for failed
drives.
Write Pattern