Kawai MP6 - Manual (Page 48)

48
7
. Song Recorder
(I
nt
e
rn
a
l M
e
m
o
ry
)
7. Song Recorder
(Internal Memory)
The MP6 allows up to 10 different songs to be recorded, stored in internal
memory, and played back at the touch of a button.
7.1 Recording a song
7.1.1 Entering song recorder mode
Press the RECORDER button.
The type (MIDI/AUDIO/SMF) selection screen will be shown in the LCD display.
Press the VALUE d button to change the type to MIDI, then press the z button.
The Internal Song Recorder screen will be shown in the LCD display, and the LED
indicator for the
z button will start to flash.
The MP6 recorder will enter standby mode.
Press the __ or `` buttons to select the song memory for the recording, and
the VALUE buttons to increase or decrease the tempo.
The MP6 recorder will enter standby mode.
7.1.2 Starting the song recorder
Press a key on the keyboard.
The LED indicators for the
z and f/„ buttons will turn on, and recording will
start.
* Recording can also be started by pressing the f/„ button.
* If the METRONOME is turned on before recording, a one bar introduction will
also be played when the f/„ button is pressed.
7.1.3 Stopping the song recorder
Press the f/„ button.
The LED indicators for the z and f/„ buttons will turn off, the recorder will
stop, and the recorded song will be stored in internal memory.
After a few seconds, the Play Internal screen will be shown in the LCD display,
indicating that the song is ready for playback.
* The maximum recording capacity is approximately 90,000 notes, with button
and pedal presses also counted as one note.
* If the maximum recording capacity is reached during recording, the recorder
will stop automatically.
* Recorder songs will remain in memory after the power is turned off.
Type = MIDI
[REC]or[PLAY]
Type = MIDI
[REC]or[PLAY]
1:INT SONG 1
œ=120
1:INT SONG 1
œ=120