Kawai MP6 - Manual (Page 61)

61
1
0
. SY
STE
M But
ton
10.2.8 Local Control
On The keyboard of the MP6 and the internal tone generators are
connected. Set this parameter to “On” for normal use.
Off The internal connection between the keyboard and the tone
generators is switched off. This feature will avoid the “Doubled
Sound” that results from use with an external sequencer equipped
with Soft Thru or Echo Thru.
10.2.9 Program Change Mode
This parameter determines the sound numbering format that is used when
sending MIDI Program Change information.
Panel Program Change data is sent in accordance with the instrument’s
panel button numbering format.
GM Program Change data is sent in accordance with the standard GM
numbering format.
Select this setting when connecting the MP6 to GM devices.
10.2.10 MIDI Receive Mode
This parameter determines how the MP6 receives MIDI information.
Panel Only MIDI information received from the designated system
channel will be sent to Zone 1-4 (Int. only).
With this setting, layer and internal effects will be available.
Multi MIDI information received from all MIDI channels (1-16) will be sent
to Zone 1-4 or MIDI channels.
With this setting, the MIDI Receive Ch. (10.2.11) can also be specified.
Omni Received data controls the whole panel, regardless of the MIDI
channel.
SYSTEM
Local = On
SYSTEM
Local = On
SYSTEM
Prg Mode =Panel
SYSTEM
Prg Mode =Panel
SYSTEM
Rcv Mode =Panel
SYSTEM
Rcv Mode =Panel