MacroSystem DVD-Arabesk 3 - Manual (Page 5)

5
1. General
Thank you for buying DVD-Arabesk 3!
We thank you for your trust and hope that this
product will meet your expectations.
This guide will show you how to easily create
your own DVD.
We are available for any questions or
suggestions you may have.
For this purpose please contact us at the
following addresses:
Address
MacroSystem Digital Video AG
Postfach 020240
58290 Wetter
Germany
MacroSystem US
5485 Conestoga Court
Boulder, Colorado
USA
80301
Phone
0 +49 (0)2335/960-0
(Germany)
303-440-5311 (North America)
E-Mail
[email protected]
(Germany)
[email protected] (North America)
Fax
0 +49 (0)2335/960-100
(Germany)
303-440-5322 (North America)
Up-to-date information on MacroSystem pro-
ducts and our sales department can be found on
the Internet.
Please visit our Website:
http://www.macrosystem.de (Germany)
http://www.macrosystem.us (North America)
Phone Support
If you have special technical questions, you can
call our technical support hotline:
(Germany)
Monday -Thursday from 10.00 to 17.00 hours
Friday 10.00 to 16.00 hours
+49 (0)2335/960-112
(North America)
Monday - Friday 9a.m. - 5p.m. (Mountain Stan-
dard Time)
303-801-1010
Outside of these times you can email or fax us.
Messages received in this way are handled du-
ring business hours.
E-Mail Support
[email protected]
(Germany)
[email protected] (North America)
[email protected] (N.A.)
[email protected] (N .A.)
Fax Support
+49 (0)2335/960-110
(Germany)
303-801-1058 (North America)
Please have the serial number of your machine
or your customer number ready whenever you
contact us.
2. Installing and Starting the
Program
In order to install DVD-Arabesk 3 you need a
storage capacity of at least 256 MB RAM.
Before you can burn entire dual-layer DVDs
(DVD+R DL), however, you will need to carry
out a fresh installation of the SMART EDIT 3.5
system software at least as well as install a DVD
drive of version DVR-108 or higher. (For further
information on burning dual-layer DVDs, please
read Chapter 3.3, item (9).)
Leave your system turned on and select the
Install Product button in the System Settings.
After the corresponding window has appeared,
insert the installation SmartMedia card into the
drive so that the gold contacts are facing down