MBM Corporation AEROCUT NANO - Manual (Page 11)

AeroCut nano OPERATION MANUAL
11
2.5 Paper setting
① Press the button on the home screen ( Page
7) if the feed table is in upper position. The feed table
moves down to the lower dead point.
② Flip through the sheets well before you put them on the
feed table.
③ Set the sheets on the feed table. Use the pager guide
(Large) and paper guides (Small) to fix the sheets.
Pager guide (Large) Pager guide (Small)
Pager guide (Small)
Pager
・Paper loading capacity is 1.2”.
Side guide Gap Paper
・Make sure that the paper stack does not
exceed the MAX label.
・It affects finishing accuracy if there is a
gap between the side guide and the
sheets.
・If the print is skew on the sheets, the angle of the side guide can be adjusted.
Page 15