MBM Corporation AEROCUT NANO User Manual
Page 25
Advertising
AeroCut nano OPERATION MANUAL
25
6.
Paper remains inside the machine.
Remove the paper.
7.
Overload error 1
Cutting did not complete within a set
time period.
Remove the paper remaining inside the
machine.
8.
Overload error 2
An overloading error occurred at the
feed table.
Check the feed table.
9.
Communication with the touch panel is
not possible.
Turn off the power, and turn it on again
after 5 seconds or longer.
10.
Paper size error
Correct the paper size to fit in the value
range below.
11.
Back margin error
Correct the back margin to fit in the
value specified below.
Advertising