5 manual control, 1 manual control screen, 2 paper jam – MBM Corporation AEROCUT NANO User Manual
Page 23: Manual control, Manual control screen, Paper jam
Advertising
AeroCut nano OPERATION MANUAL
23
5 Manual
control
5.1 Manual control screen
Home screen
MANUAL CONTROL screen
・
Feed roller will rotate.
Inching
・
Guillotine will move once.
・
Feed table will move.
5.2 Paper jam
MANUAL CONTROL screen
① Enter MANUAL CONTROL screen,
press < > buttons to inch the rollers
forward/backward and remove the
jammed paper.
If paper is stuck around the guillotine
section, press CUTTER to cycle the
guillotine to chop jammed paper.
② If the Main motor doesn't rotate, slow
down the speed.
MANUAL CONTROL screen
Advertising