MBM Corporation AEROCUT NANO - Manual (Page 2)

AeroCut nano OPERATION MANUAL
2
・Use machine only after reading the "Safety Instructions" given below carefully.
・These safety instructions are given to ensure that the machine will be used safely and
properly and to prevent operators from sustaining harm and injuries.
Definition of Symbols and Notes
In this manual the following names and signs stand for possible dangers.
Danger
This symbol stands for immediate danger threatening the life and health
of persons. Disregarding these instructions may cause severe damage
to health and even serious injuries.
Caution
This symbol stands for an endangering situation that may occur.
Disregarding these instructions may lead to slight injuries or damage to
property.
Note
This symbol stands for notes, operational hints, and other useful
information.
They are convenient for exploiting the machine’s functional abilities.
SAFETY INSTRUCTIONS
Explanations of the illustrations used in the Safety Instructions are given as follows:
1. Don't open the cover of the equipment. There is a danger of receiving an injury or electric
shock.
2. Don't touch any rotating part. There is a danger of receiving an injury.
1. Don't put a hand into the cover or a clearance between parts. There is a danger of
receiving an injury.
2. Don't bring a hand, face, hair, sleeves of clothes and the like close to the rotating parts of
the machine. There is a danger of receiving an injury.
Danger
Caution