Adjustments on the paper feed section – MBM Corporation AEROCUT NANO User Manual
Page 16
Advertising
AeroCut nano OPERATION MANUAL
16
3.3 Adjustments on the paper feed section
・ Adjustments are required when the
machine is likely to feed double or skew.
Home screen
MANUAL CONTROL screen
・Air blow adjustment
Default
Reduce double feed
Reduce skew
・PAPER FEED WORK TIME adjustment
Default
Reduce double feed
Reduce skew
0.0 1.0 2.0 3.0 4.0 5.0
・Sensitivity of Double feed sensor
Default
Low sensitive
High sensitive
・If the machine detects double feed even
with a single sheet, lower the sensitivity of
the detection sensor.
Paper feed
direction
Detection area
・The detection sensor detects double feed
by checking the edge of sheets as shown
on the drawing. It is recommended not to
print on the sheet edge.
Advertising