MBM Corporation BINDERYMATE 2 - Manual (Page 34)

32
DISMANTLING DRIVE
D
15. Remove screws securing
ON/OFF switch bracket.
16. Remove two screws
from front glide
bracket
17. Hold front glide bracket in
place while removing the top
screw.
O N / O F F
SWITCH
BRACKET
TRIP LOCATING ROD
FRONT GLIDE BRACKET
PAPER TRIP ROD/KNOB
NOTE: Rear table must be removed prior
to trip mechanism disassemblly.
(QF27F18)
18. Hold the paper trip rod/knob in place
while gently pulling the front glide
bracket off of the trip locating rod.