MBM Corporation MBM 256 LS Folder - Manual (Page 25)

23
Rev. 03/05
Operating Manual Maintenance And Troubleshooting
Central Folding
Area Clearing
The folding process takes place in the
area within the fold tables. To reach
this area, both of the fold table tops
must be removed.
To clear a jam in the central folding area:
1. Release the two latches (39) at the
top of each fold table.
2. Move the fold stop levers (14) near
the center of the table to provide
clearance for removing the fold
table tops.
3. Slide each fold table top upward a
few inches to clear the guides at the
bottom, then lift it off the machine.
The top roller (40) and lower fold
tables will be visible.
25
39
40
25. Top roller release lever
39. Fold table latch
40. Top roller