MBM Corporation MBM 256 LS Folder - Manual (Page 8)

6
Rev. 03/05
Introduction Operating Manual
Customer Assistance
Should you encounter any problems with this machine or not
understand its many features, please refer to this manual.
If you require further assistance after reading this manual,
please contact the authorized MBM Dealer or Distributor for
your location. These authorized Representatives employ factory
trained service technicians and stock genuine spare parts.
Terminology
Several terms have specific meanings as they are used in this manual:
DOUBLE-PARALLEL FOLD
A fold that divides the sheet into four panels. Useful for inserting
legal size sheets into business envelopes. This fold cannot be
made in sheets smaller than legal size.
EXIT END
The left end of the folding machine where the folded documents
exit the machine.
FEED END
The right end of the folding machine where the flat documents
are placed to enter the folding process.
FOLD TABLE
The sloping portion of the folding machine that controls the
position of the fold on the document. The first fold is formed
when the document is in the fold table to the right; the second
fold is formed when the document is in the fold table to the left.
GATE FOLD
A fold that divides the sheet into one panel that is half the length
of the sheet and two overlapping panels one quarter the length of
the sheet.