Montigo R320 - Manual (Page 13)

Picture of Non combustible Header
Recessed Installation:
This fireplace can be recessed into the floor to get the viewing area as low as possible.
Maintain a minimum of 6" clearance from the bottom of glass to completed floor. Minimum clearance can be reduced to 3" for uncarpeted
flooring. Discolouration may occur due to high temperatures.
Figure 6. Recessed Fireplace installation
6” clearance
1” clearance
Recessed Floor
Steel header
(supplied by Montigo)
2-pcs 2 x 4 (vertical)
Both Sides Typ.
1” clearance 1” clearance
2 x 4
(horizontal)
2 x 4
(Vertical)
1” clearance 1” clearance
2 x 4
(horizontal )
Note: Images are shown without screens for clarity purposes.
However, your fireplace should not be operated without proper
installation of screens.
R320 & R420 Power Vent Indoor Gas Fireplace
Page 13
XG0770 - 150105.1
Installation