Montigo P52DF - Manual (Page 25)

Page 25
P52DF* Indoor Gas Fireplace
XG0196 - 150204.3
Installation
Installing the Driftwood Log Set
Step 1. Remove the glass door as described in the
previous section.
LGS58
1 2 3 4 5 6
Step 3. Unpack the logs and handle with care.
Step 2. Ensure selected media is installed per
instruction as per Figures 23 - 23f or 24 - 24a.
Step 4. Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports.
Place Log 2 of LGS58 on top of log 3.See Figure 25b.
Step 5. Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see f igure 25c
3
2
1
5
LGS59
1 2 3 4 5 6
The P52DF* has the option of installing a drift wood log set.
Once the firestones or speckled stones have been installed
the log set can be installed.
Ensure logs are securely placed and will not tip or fall.
Remove media where logs touch the burner tray to ensure
a more secure position.
Lean the logs against the back panels.
NO LOGS SHOULD
LAY ACROSS OR OVER TOP OF THE BURNER PORTS
ON THE SURFACE OF THE BURNER.
Figure 25.
Figure 25a.
Ports
Figure 25b.
Ports
Pilot
Step 6. Place log 6 of LGS59 across of log 1 of LGS58,
see figure 25e.
Figure 25c.
Figure 25d.
6
Figure 25e.
Ports
Ports