RGBLink VSP 737 User Manual - Manual (Page 32)

2. Hardware Orientation
VSP 737 Front Panel Keyboard Operation
VSP 737 User Manual 32
SAVE 1~10 light on together, select the wanted key, e.g. Select 1:
Details are in: How to save parameter.
Tap the key to load the saved user data; when the key lights on, keys of
BGA, BGB, LAYER A, LAYER B, BLACK, SPLIT LAYER, KEY, FULL
SCREEN, PIP and CLEAR LAYER light on together, the corresponding
numbers 1~10 are the save mode 1~10 that can be loaded, select the
wanted number. After loading, all keys light off.
LOAD 1~10 light on together, select the wanted key, e.g. Select 1:
Details are in: Hhow to load the saving parameter.
Swap Layer：Tap the key to affect the function of swap layer, Layer A and
Layer B lamination will be switched.
Freeze：Tap the key to freeze the current picture; tap again to relieve
the freezing; the blinking key of either layer A or layer B is the editable
layer.
Reset：Tap the key for factory reset.
Note
Tap the key and rotate the knob to select the wanted resolution, VSP
737supports 10 kinds of resolution.
Factory reset is just for the current function,
not for the whole device functions.
Load Setting From:
Press Load To Exit
Load Setting From:
SAVE1 FINISHED!
fFinished!l