RGBLink VSP 737 User Manual - Manual (Page 62)

5. System setting and operation
How to crop on input pictures
VSP 737 User Manual 62
How to Crop Input Pictures
Firstly assure the device is powered on. Details are in: How to Confirm the
Device is in Normal Operation.
Key operation is as below: (Factory setting parameter)
1. Tap
2. LCD screen shows:
3.
Tap NEXT, rotate the knob, adjust cropped picture‘s width, tap NEXT to
confirm the adjusting value;
4. Rotate the knob again to adjust cropped picture‘s height, crop picture X
position and Y position, tap NEXT to confirm;
Note
System default picture start point（0，0）
locates at top left corner.
CROP WIDTH B:
>1024
CROP HEIGHT B:
>1024
CROP POS X B:
>0
CROP POS Y B:
>0