How to select effects switching, System setting and operation – RGBLink VSP 737 User Manual User Manual
Page 65
Advertising
5. System setting and operation
How to select effects switching
VSP 737 User Manual 65
How to Select Effects Switching
Firstly assure the device is powered on.
Details are in: How to Confirm the
Device is in Normal Operation.
Effect switch over
keys:
Descriptions:WIPE: Pull-screen effect; CUT: Seamless quick switch over;
MIX: Fade-in-fade-out switch over.
Operation is as below:
1. Tap
for Pull-screen effect:
2. Rotate the knob to select needed pull-screen effect and speed:
SETUP WIPE MODE:
>WIPE HARD SWITCH
SETUP WIPE MODE:
>WIPE SOFT SWITCH
WIPE MODE:
>WIPE UP
WIPE SPEED:
>8
Advertising